Facebook Twitter YouTube YouTube RSS

Brabham BT44, Tamiya 1/12 scale A step by step, for newcomers

By Mario Covalski  

Among the articles I had in mind to write about, there was one that headed my list, and without any doubt, It was about the Brabham BT44. By the end of my youth, I saw this beautiful, simple and successful car, running in Buenos Aires, driven by Carlos Reutemann, one of the most expert F1 drivers of the last 30 years. The purpose of this note is to show simple guidelines following the instruction manual steps, recommending some details that can be applied to improve even more the original Tamiya kit.

Read More

Brabham BT44 English BODY {display:none}

Formula one

Mvc-898f.jpg (164686 bytes) 

Brabham BT44, Tamiya 1/12 scale A "step by step" for newcomers

by Mario Covalski © 2003

Legal Notice

No material from Modeler Site any Web site owned, operated, licensed, or controlled by Mario Covalski & Associated may be copied, reproduced, republished, uploaded, posted, transmitted, or distributed in any way, except that you may download one copy of the materials on any single computer for your personal, non-commercial home use only, provided you keep intact all copyright and other proprietary notices. Modification of the materials or use of the materials for any other purpose is a violation of Mario Covalski & Associated's copyright and other proprietary rights.

Read More here > Legal notice

Among the articles I had in mind to write about, there was one that headed my list, and without any doubt, It was about the Brabham BT44. By the end of my youth, I saw this beautiful, simple and successful car, running in Buenos Aires, driven by Carlos Reutemann, one of the most expert F1 drivers of the last 30 years.

The BT44 was one of my first Tamiya F1 kits. I built one in 1978, another in 1991, and the third and last one in 1998, which is still well preserved in my showcase. Actually, this note is entirely devoted to it. It's one of the most valued models in Argentina, since Reutemann was as well as Juan Manuel Fangio, a beloved and admiring driver. Really believe me, I've never felt so joyful as when Reutemann drove his first Ferrari (312T2 in 1976).

Besides, this model was the cover subject of Modeler Site in April 2000, but only with a gallery, so I was in debt not only with my remembrance but also with my model.
As the kit was constructed several years ago, and my vision of how to build a F1 kit was quite different, I'll take advantage of the opportunity to write a note specially to novices, who I guess, will receive it with pleasure.
The purpose of this note is to show simple guidelines following the instruction manual steps, recommending some details that can be applied to improve even more the original Tamiya kit.


Mvc-899f.jpg (107109 bytes)

Mvc-009f.jpg (84309 bytes)

Mvc-035f.jpg (165839 bytes)

About the kit

Speaking about a well known kit, there's nothing new to say about, except that it's a great exponent of the 70s technology with incredible details and that I would like to have time (and skill) to develop a not expensive PE set with some parts I consider, would be interesting to replace.
In spite of this, built out of the box, it looks impressive and captures the aggressiveness and the thoroughbred pedigree it was.
Those skillful modelers, will find much fun, being able to add details and to improve some parts, but essentially it's excellent and convincing.

Step by Step

Step 1

Parts E13, E14 and E15 don't have to be glued completely, 1mm should have to be left (as the image shows) to make the placement of K7 and K8 easier.

01.jpg (19148 bytes)

Step 2

As in the actual car, D31 may be drilled to get more realism, my advice is not to do the same with D27,28,29 and 30.

02.jpg (20994 bytes)

Step 3

The steering box could be replaced with the system I used in the Yardley (it really looks more real).

wpe9.jpg (17687 bytes)

This note is offered in PDF format to be read or printed using Acrobat reader, contact our webmaster > Here

Includes more than 76 pics, here we show only the text pages.


Esta Nota es ofrecida en formato PDF, el cual puede ser leído o impreso usando el Acrobat reader, contacte a nuestro webmaster > Aquí

Incluye más de 76 imágenes, aquí solo mostramos las paginas de texto.



Big size photos are only available in our PDF format.

Support us ordering our notes in PDF > Here

Comment in Facebook

MODELERSITE.COM takes no responsibility and assumes no liability for any content posted by users or any third party and they will be liable for any damages of any kind, including, but not limited to direct, indirect, incidental, punitive, and consequential damages.

Subscribe our Newsletter




December 2015 Over the end of the year, we are offering a preview of the best articles we were proud to have during 2015. Enjoy them and happy new year.


By Modeler Site

Problems downloading files

By Mario Covalski

Realistic wire wheels for 1/12 scale motorcycles One of the biggest challenges for a modeler who builds motorcycles in 1/12 scale, is to modify a wire wheel and make it look realistic; specially without having to buy an aftermarket kit. Anyway, there are no kits for this kind of modification (except for one of the Acu-stion for the Tamiya XV1600 kit), so it's not possible to get one. So any modeler attempting to do this task must rely in his/her ability in order, to get a good result.

By Gary Wickham

Advanced techniques: Building the P-51D Mustang "Lt Col John Myers" Petie 3rd Dragon 1/32 scale The infamous Dragon P-51D in 1/32. This model was started before Tamiya announced their kit, and I have to admit that during this build I did consider scrapping it more than once. In the end, I am very glad I did not. Despite the challenges and limitations of this kit, I am very happy (and proud) of the end result.

By Edwing E. Merlo Paredes

Building the Mini Cooper S Countryman, a guide for beginners Hasegawa #24121 - 1/24 scale The aim of this article is to give the reader a detailed and comprehensive guide. Here you’ll have typical indications for the most experienced modelers but very useful for newcomers or for those about to take their first steps into scale model cars. In spite that this kit is simple, it’s very important to follow the instructions to avoid unexpected surprises. In spite that modelers use to skip or change the order in the instruction steps, I’ll build this kit as per instructions.

By Mario Covalski

Building an improving the Protar Mclaren MP 4/2C - 1/12 scale ( revised with new pictures) My objective when I built the PM4/2 was to have a depiction of that car, with the quality aspect of Tamiya's McLaren MP4/6 kit, due to the similarity of both cars, and the building materials. The purpose of this note would not be to tell you how I built the model, because this kit has been discontinued more than ten years ago, so it is quite difficult to get one. I don't think it is reasonable to write a thorough note on specific details; so I will concentrate in general detailing that can be applied to other models with similar characteristics... and quality.

By Mario Covalski

Tamiya Caterhams, a step by step guide for novices 1/12 scale The first Catherham from Tamiya coming to my hands at the end of 1994, was the “Cycle Fender Special” (10202), since the “Super Seven BDR was out of stock, and it was impossible for me to get it from the stores I used to buy kits. From that moment on, my affair with which, I think is the best scale car kit ever produced, began. And here my comment: probably, you have seen better detailed kits, or even superb models limited editions.

By Roberto Jacobone

Tamiya Porsche 911, A weekend project for novices 1/24 scale This Porsche 911 has been built in a few nights to be entered at the “Trofeo Tamiya” which took place the day I completed the model. I normally have no problems in starting new projects but then I struggle to finish one, except if I have to enter a contest. At that time the 911 Carrera was a relatively new issued kit, so mine would have been the first one seen at a contest in my area, that’s the reason why I choose a non-standard eye-catching color and showy wheels.

By Patricio Delfosse

Detailing and weathering the JSU-122 Dragon #6013 1/35 scale This note aims at showing the corrections made from scratch, as well as pointing out the necessary modifications to include the Eduard's improvement set to the kit. Also, I focused on the painting aspects to get a weathered effect.

By Denis R.S.Bomfim

Building rusted cars - VW 1966 - 1/24 scale It all started with a joke, I built a rusted Mustang GT 350 to make a gift to a friend who only builds Mustangs. It was at a modelers meeting when he received a homage and the joke consisted of letting him know the arduous remodeling and restoration work he would have with this rusted Mustang. I took advantage of my work and presented it in a contest that took place in Campinas city. Finally, the model was “best of the show” and they called me mad for giving a winning model. My answer was.... I will have to make another rusted model for me.

By William Chan

How to build a winner. Ferrari F2001B (First place TamCon 2005) 1/20 scale Here William offers us a large article, step by step, with pictures during the whole building and a commentary about what we are looking, he calls this a diary, but I think that’s the state of the art of the patience to take pictures. Thanks for the time and effort William spent on writing this article for Modeler Site.

By Mario Covalski

Building 1/12 F1 resin model kits: A step by step guide for novices This article aims at offering an illustrated guide, with pictures, explaining step by step the tasks that should be done, how to and the reasons, it’s basically a visual guide, based on the construction of two MG models: the 2002 Ferrari and the 2003- GA.

By William Chan

Building the Tamiya Ferrari 310B first place TamCon 2003 Tamiya 1/20 scale F310B was a 1997 Ferrari F1 contender. It was very close to take away world championship from Jacque Villeneuve that year until the final nasty collision caused by Michael Schumacher. As a result, Schumacher was the one got thrown off the track and Villeneuve went on the win the driver championship. Later Schumacher was disqualified that year too. Very memorable year especially when Schumacher was fighting all points back and it made thing exciting.

By Alessandro Prini

A cutaway Testarossa Tamiya 1/24 Usually I am not concerned with production cars but, inspirated by some drawings published in Quattroruote (the most important Italian cars magazine) during the 80’s, I decided to start a series of cutaway models, revealing the beautiful technique hidden under their body panels. Some sport cars from the Tamiya range (namely Ferrari) are the perfect bases to carry out this long-term project, so let’s begin with the Testarossa.