Facebook Twitter YouTube YouTube RSS

Building the Italeri Fiat 500F 1/12 scale


By Fabrice Marechal  

Certainly, Italeri offer us a kit that, once finished, is really a beautiful and shocking model due to its size, we are not accustomed to seeing a Fiat 500 in 1/12 scale. There is very little to be changed or improved to make the most of it. Unfortunately, some construction steps are not easy to understand and instructions are not always clear. In this respect, Italeri did nothing to facilitate the modelers’ work, and assembling the headlights, window frames, bodywork, etc., are a bit complicated. I built the model almost out of the box, enhancing the painting and assembling was correct and error free as far as possible, and I think it will be an excellent guide for those who want to face this project, having in advance the difficulties you’ll have to face and a good painting guide.


Read More

Building the Italeri Fiat 500F 1/12 scale English BODY {display:none}

Cars

Building the Italeri Fiat 500F 1/12 scale

by Fabrice Marechal © Modeler Site

Legal Notice

No material from Modeler Site any Web site owned, operated, licensed, or controlled by Damian Covalski may be copied, reproduced, republished, uploaded, posted, transmitted, or distributed in any way, except that you may download one copy of the materials on any single computer for your personal, non-commercial home use only, provided you keep intact all copyright and other proprietary notices. Modification of the materials or use of the materials for any other purpose is a violation of Damian Covalski's copyright and other proprietary rights.

Read More here > Legal notice


Certainly, Italeri offer us a kit that, once finished, is really a beautiful and shocking model due to its size, we are not accustomed to seeing a Fiat 500 in 1/12 scale. There is very little to be changed or improved to make the most of it. Unfortunately, some construction steps are not easy to understand and instructions are not always clear. In this respect, Italeri did nothing to facilitate the modelers’ work, and assembling the headlights, window frames, bodywork, etc., are a bit complicated. I think this is a complicated model for newcomers, while the experienced modellers will find an excellent base to enjoy and carry out all kind of improvements.

 


I built the model almost out of the box, enhancing the painting and assembling was correct and error free as far as possible, and I think it will be an excellent guide for those who want to face this project, having in advance the difficulties you’ll have to face and a good painting guide.


This article is dedicated to Alain Bouldouyre, a great draughtsman and illustrator, a Fiat 500 enthusiast His drawings are in advertisements of the car published in several specialized magazines of the time (Rétroviseur, L'Auto Journal). In 1968 he converted the 500 of his mother into the 595 esseEsse, after an epic voyage made to Corso Marche, at Abarth, in 1969. At that time, he also wrote an article, published in Champion!

Here you’ll see the transcription of Alain sharing his personal feeling about this original and legendary car .

Editor's note: We prefer to transcribe Mr. Bouldouyre's words without translation, letting the reader the freedom to make his own translation.


Tordons d'abord le cou à une idée reçue...A l'époque, la Fiat 500, héritière de la 500 C de 1936, n'a jamais été surnommée le "pot de yaourt"! C'est sa petite cousine… l'Isetta qui, par sa couleur et forme même était un "pot de yaourt".

Énorme succès commercial, la FIAT Nuova 500 est, aujourd'hui encore le symbole d'une Italie des années 50/60.. d'une dolce Vita plus accessible et populaire que Ferrari ou Maserati qui hantaient la ViaVeneto. Voiture urbaine mais aussi 2ème voiture familiale elle a accompagné les débuts...au volant et dans la vie... de tous les "baby Boomers !

Une voiture fiable, robuste..une vraie voiture de 2m97 de long avec un moteur de 500cc, bicylindre, refroidi par air qui donnait un peu plus de 18cv, bien vaillants, transformés en pur sangs de 35 à 40 CV (!!) par les sorciers Abarth ou Giannini. La 500 a été inventée, crée, voulue par un génie du design automobile italien: Dante Giacosa. Il fit toute sa carrière chez Fiat mais a su marquer par cette création, l'histoire de l'automobile.

Ce fut.. c'est encore..la plus grande réussite commerciale de FIAT, qui aujourd'hui encore, en surfant sur une vague néo rétro revisite avec succès son passé (récit par Alain Bouldouyre).


This tutorial is offered in PDF format to be read or printed using Acrobat reader, contact our webmaster > Here

Includes more than 70 pics, here we show only the text pages.

 

Esta Nota es ofrecida en formato PDF, el cual puede ser leído o impreso usando el Acrobat reader, contacte a nuestro webmaster > Aquí

Incluye más de 70 imágenes, aquí solo mostramos las paginas de texto.

 


Big size photos are only available in our PDF format.


Support us ordering our notes in PDF > Here


Comment in Facebook



MODELERSITE.COM takes no responsibility and assumes no liability for any content posted by users or any third party and they will be liable for any damages of any kind, including, but not limited to direct, indirect, incidental, punitive, and consequential damages.


Subscribe our Newsletter


LATEST NEWS


Editorials

Editorial

The best of 2018 Over the end of the year, we are offering a preview of the articles we were proud to have during 2018. Enjoy them and happy new year.




Showcases

By Modeler Site

Problems downloading files

By Mario Covalski

Building the RC Leopard 2A4 1/16 scale A couple of years ago, I discover  www.Ludwigs-Hobby-Seite.de, a web site where Christian Ludwig offers his kits mostly made of  plastic, cut with the CNC technology. So, I found a kit to convert a Heng Long 2A6 to the 2A4, that is to say a previous version.

By Mario Covalski

Converting the Trumpeter T-72 MBT to RC 1/16 scale To improve the Heng Long T-90 I read some books and gathered information/photos from the web. This little research made me know more about these compact Russian tanks T-72/T-90, and so it grew my interest in them. So I bought the 1/16 T-72 Trumpeter kit. This kit was designed not only for static but also for RC. The static version has some extra details and modifications, reminds me the, T-34 from WSN, a brand with which Trumpeter sold the T-34 RC. The philosophy of the T-72 is the same, I still believe that the T-34 gearbox with its motors, would fit in the hull. Perfectly.  

By Mario Covalski

Building and improving the Italeri / Protar Alfa Romeo 179 1980 1/12 scale In May 2001 I wrote a brief preview on the Protar's 1/12 Alfa Romeo 179. This wonderful Formula One was one of the few cars in modern F1 history which chassis and engine were the same brand. Is this model really difficult? This is the key question for this model, and the answer is NO. If it were a Tamiya model, that is to say the same matrix but injected with Tamiya plastic and having the quality control of this huge Japanese company, I would say that this is one of the most delicious models I have ever built. Unfortunately, it has some flaws, mainly due to its poor quality than to the work of the Protar craftsmen.

By Mario Covalski

Tamiya Caterhams, a step by step guide for novices 1/12 scale The first Catherham from Tamiya coming to my hands at the end of 1994, was the “Cycle Fender Special” (10202), since the “Super Seven BDR was out of stock, and it was impossible for me to get it from the stores I used to buy kits. From that moment on, my affair with which, I think is the best scale car kit ever produced, began. And here my comment: probably, you have seen better detailed kits, or even superb models limited editions.

By Rick & Jannine Bennett

Learning to paint figures step by step

By Mario Covalski

Building 1/12 F1 resin model kits: A step by step guide for novices This article aims at offering an illustrated guide, with pictures, explaining step by step the tasks that should be done, how to and the reasons, it’s basically a visual guide, based on the construction of two MG models: the 2002 Ferrari and the 2003- GA.

By Jose Antonio Solbes

How to paint with lacquers

By Mario Covalski

Building the IDF M50 radio controled Sherman 1/16 scale Building the M50 in 1/16 scale is a project I have had in mind for many years, and after the M51s (from the article published in May 2012) I felt the need to continue with this one. In this article, I’ll share with the reader my experience in building the M50 RC 1/16 from a Tamiya M4 -105mm with HVSS suspension.

By Mario Covalski

Building the Pocher Lamborghini Huracan, step by step, painting guide and tips. 1/8 scale These are the new times of Pocher, hand in hand with Hornby, the brand that offer models which represent high technology subjects as Lamborghini cars and Ducati motorcycles. Manufactured by Ixo, the Chinese company, they are the fashion of the time, huge 1/8 scale cars with metal body and chassis, already painted (luckily!). They compete with Amalgam and other brands with less expectations but to fit any budget and if you have some experience as model builder, the result will be acceptable and even excellent. The aim of this tutorial is to share the step by step in the Lamborghini Huracán construction, the last Pocher issue explaining the work achieved so that it may be useful for less experienced modelers and collectors.

By Claudio Kalicinski

Scratchbuilding the Nieuport 6H, 1/48 scale I decided to scratchbuild this plane after seeing the scale drawings by Mike Fletcher in his web site: The Nieuport Pages. I sent an E-mail to him and he kindly sent me pictures and larger resolution scale drawings. Once I enlarged the plans to 1/48, I noticed how big the plane was....

By Ricardo Gonzalez

Building and customizing the Tamiya Ducati Panigale S 1/12 scale The Ducatti Panigale is to my liking one of the most spectacular motorcycles of the past decade. Thanks to Tamiya we can have a model of it, both were the reasons why I decided to build it trying to get the most detailed model I could , taking advantage of the fact that as it was a mass production model, it would be possible for me to get a lot of references. Not only I built and superdetailed the model, but also made a slightly and own customized version, a real Panigale, as I would like to have. The aim of this article, is to show with pictures and their comments the work accomplished as a guide and to give ideas of the details that can be added or showing in some cases how to do the different tasks.

By Mario Covalski

Improving the Dragon Kubelwagen 1/6 scale # 75003 Action figure collecting is one of the most popular hobbies in the world. Figures made out of different plastic materials based on TV sci-fi series, sci-fi movies (for instance GI Joe action figures) and facts from real life such as the representation of different war scenarios. Soldier figures are commonly made in 1/6 scale, they’re represented with military uniforms made from genuine fabric and the weapons that real soldiers use to have, vehicles included.

By Gary Wickham

Advanced techniques: Building the P-51D Mustang "Lt Col John Myers" Petie 3rd Dragon 1/32 scale The infamous Dragon P-51D in 1/32. This model was started before Tamiya announced their kit, and I have to admit that during this build I did consider scrapping it more than once. In the end, I am very glad I did not. Despite the challenges and limitations of this kit, I am very happy (and proud) of the end result.

By Mario Covalski

Realistic wire wheels for 1/12 scale motorcycles One of the biggest challenges for a modeler who builds motorcycles in 1/12 scale, is to modify a wire wheel and make it look realistic; specially without having to buy an aftermarket kit. Anyway, there are no kits for this kind of modification (except for one of the Acu-stion for the Tamiya XV1600 kit), so it's not possible to get one. So any modeler attempting to do this task must rely in his/her ability in order, to get a good result.

By Denis R.S.Bomfim

Building rusted cars - VW 1966 - 1/24 scale It all started with a joke, I built a rusted Mustang GT 350 to make a gift to a friend who only builds Mustangs. It was at a modelers meeting when he received a homage and the joke consisted of letting him know the arduous remodeling and restoration work he would have with this rusted Mustang. I took advantage of my work and presented it in a contest that took place in Campinas city. Finally, the model was “best of the show” and they called me mad for giving a winning model. My answer was.... I will have to make another rusted model for me.

By Mario Covalski

Improving the Dragon Schwimmwagen - 1/6 scale #75013 Being a car fan, everything that has wheels attracts my attention, nevertheless, the Kubelwagen’s amphibious sibling, went unnoticed by me for quite a long time. After building the 1/6 Dragon Kubel, I was pretty excited with the Schwimmwagen, and the quality of the kit and improvements Dragon introduced a couple of years after the Kubel release, really surprised me. This article aims at offering my view about this kit construction, adding some improvements I considered necessary so as to make a worthy scale model.