By Pablo Raggi | 11.01.2022 17:09
The BTM is a specialized vehicle of the engineering corps, based on the ATT artillery tractor, which in turn was built over the T-54 hull tank, using the cabin of the ZIS-150 truck. Not only did the BTM derive from this project, but there were at least 4 other designs, all for a specific use, including a version for Antarctic exploration.
By Allon Kira | 10.01.2022 11:37
Merkava (Chariot) is the name of a large series of Israeli battle tanks that form the basis of the Israeli armor corps. Manufacture of the Merkava tanks began in 1979 while more and more advanced models were developed over the years. The most advanced model is the Mark 4 that went into production starting in 2003. The tutorial I'm sharing is focused in the painting and weathering and based in the 1/35 Takom Merkava Mark 2. So I decided to build the model straight out of the box with no special extras.
By Steve Jones | 12.13.2020 11:13
The Bronco plastic kit of the Turan II is another addition to their WWII Hungarian Tank range of 1/35 scale kits. Parts were beautifully detailed with little need for cleaning of flash. There were 216 individual track links in brown plastic, two sheets of photo-etched parts and clear parts...
By Andre Pantarotto | 11.29.2020 14:34
I wanted to build the Opel truck, is a model I like very much, but why not to take the opportunity to add other beautiful kit from Revell I had in my stash, so the Porsche tractor was added to this build. There was plenty of room for details and weathering which brought more fun and turned the model in a diorama. This tutorial is to share the steps I followed to get this ready to place in the showcase, so here we go!
By Allon Kira | 10.29.2020 11:07
Here is my Tiger model, IDF, Nagmachon – early in 1/35.
Additions to the model:
- 1/35 droid by Legend
- different resin stowage parts
- Voyager Nagmachon lenses
- Some scratch build
- Paints and weathering effects by Ammo-Mig, Tamiya and AK.
By David Guardia | 10.02.2020 11:55
Eduard is characterized by making authentic jewels, both in aftermarkets and full kits. The 1/72 scale is being seen often, benefited with the appearance of models like this one. Inside the boxes called "profipack", which include masks and photo etches, we find kits with some exquisite pieces. The objective of this tutorial is to share my experience during the construction and painting of this model, with problems and solutions I found.
By Andre Pantarotto | 09.14.2020 13:24
The Nissan Sunny is a very nice kit from Hasegawa and a pleasure to build, however being a work truck I felt it needed something more. To place in a vignette was the way I found for highlighting this beautiful model.
Editor note: with the PDF tutorial, DOC files are provided for you to print all the small kit boxes. More will be explained later in the text.
By Andre Pantarotto | 08.30.2020 12:37
I used the Moebius kit that represents the Chrysler 300 car that I modified to match the Petty car, and used a decal set from Power Slide. This is a kitbashing project since some parts of another kit (Moebius Models Tim Flock’s 1956 Chrysler 300 kit) were used to make this 1955 Chrysler a racing car.
By Andre Pantarotto | 07.21.2020 14:47
I wanted to build the #12 Ralph Moody car. Moody won four races in 1956 for owner Pete DePaolo. He finished eighth in the final points, with 21 Top-10 finishes in 35 races. He raced the first third of 1957, until Ford and others American automobile manufacturers pulled out of racing.
By Ricardo Gonzalez | 05.05.2020 13:26
I decided to build, superdetail and customize this Tamiya kit, due to this subject beautifulness. A stunning futuristic motorcycle where great part of the engine and other structures are exposed which allow modelers show all those details we spent many hours on without the frustration that later will be hidden under the fairing. Thus, it’s possible to present the built model showing all the work made without having to separate the body to appreciate all the details added during the construction.
By Andre Pantarotto | 03.29.2020 15:44
For those who aren't familiar with NASCAR racing, mostly out of USA, Julius Timothy "Tim" Flock was an American stock car racer. He was a two-time NASCAR series champion. Moebiuos offered some time ago the 1952 Hudson “Tim” used two times during 1952, the year he won the session.
By Mark Laird | 03.09.2020 11:36
I got this model back in the 90s for less than 100 US dollars. Although I do not have the “Perfect Parts” detail set for this model, I purchased the Thunder Valley Essentials detail set, which is two photo etched frets, a resin airbox, aluminum funnels, a pack of different pieces of aluminum, clear tubing and shrink tubing....
By Mario Covalski | 02.03.2020 15:53
This is the 1/8 Ford Mustang Shelby GT-500TM 1967 from the Planeta Deagostini Publisher. The model is offered in 100 weekly fascicles, each one includes history and parts to build the model. The model is mostly made of diecast and plastic parts, is heavy as 9 or 10Kg, but lacks of details, mostly in the engine bay area, and some parts are odd represented. So I added lot of them, fuel lines wiring...etc. The body and other diecast parts are already painted, the paint is poor and there is differences between panels as there weren’t painted at the same time.