Facebook Twitter YouTube YouTube RSS

Improving the Dragon Schwimmwagen - 1/6 scale #75013

By Mario Covalski  

Being a car fan, everything that has wheels attracts my attention, nevertheless, the Kubelwagen’s amphibious sibling, went unnoticed by me for quite a long time. After building the 1/6 Dragon Kubel, I was pretty excited with the Schwimmwagen, and the quality of the kit and improvements Dragon introduced a couple of years after the Kubel release, really surprised me. This article aims at offering my view about this kit construction, adding some improvements I considered necessary so as to make a worthy scale model.

Read More

Dragon Schwimmwagen 1:6 scale English BODY {display:none}


Improving the Dragon Schwimmwagen - 1/6 scale #75013

by Mario Covalski © 2011 Modeler Site

Legal Notice

No material from Modeler Site any Web site owned, operated, licensed, or controlled by Damian Covalski may be copied, reproduced, republished, uploaded, posted, transmitted, or distributed in any way, except that you may download one copy of the materials on any single computer for your personal, non-commercial home use only, provided you keep intact all copyright and other proprietary notices. Modification of the materials or use of the materials for any other purpose is a violation of Damian Covalski's copyright and other proprietary rights.

Read More here > Legal notice

Being a car fan, everything that has wheels attracts my attention, nevertheless, the Kubelwagen’s amphibious sibling, went unnoticed by me for quite a long time. After building the 1/6 Dragon Kubel, I was pretty excited with the Schwimmwagen, and the quality of the kit and improvements Dragon introduced a couple of years after the Kubel release, really surprised me. This article aims at offering my view about this kit construction, adding some improvements I considered necessary so as to make a worthy scale model.


About the kit

I’ll not extend in an itemized review since the article will cover the essential, but I would like to put special emphasis on several points.

Quality is much better than the Kubel, even it’s notorious the difference of details between the old parts which are common for both kits, and new ones.


Construction is much more difficult and Dragon gave up with this kit the romantic idea of using little glue.


Incredibly, it has no instructions since I can’t call instruction manual to five pictures with arrows in a model already built showing the number of parts. Inexperienced model builders will not know where to start from, even if I would not have built the first Kubel, everything would have been even more difficult.


As both kits have many parts in common, especially for the suspensions, Dragon (as usual) provide several trees from the Kubel, which allowed me to add several extra details such as the rear view mirror, handles…etc.


If the pictures and other references were necessary to build the Kubel, they are a must- have here, at least for me, since this is a less known vehicle. But note that most of the pictures show restored vehicles and there is much discrepancy among them. Although I’m not a “rivet counter”, I took the artistic freedom of interpreting some parts; anyway it’s better to start from a good reference, otherwise the final result can be ridiculous.

You can find an excellent walkaround and a lot of information in the following web site devoted to the vehicle in question and many pictures on the Internet.



Besides, I used as reference the Schwimmwagen in detail ( #19) from WWP publications, absolutely great both in quality and quantity of the information.


It’s impossible to explain in an article the building process of this model which took me 200 hours work, with comings and goings, it would be necessary a book to detail all what was done and the problems and solutions, so I concentrated on the details, and several difficulties I found and had to face during the construction.

Problem #1

The upper hull cannot be glued so easily to the chassis A as Dragon suggest. The back part of N was distorted and there was no way to make it take the necessary shape to fit in A. Dragon seem to ignore the part F (interior of the engine bay and rear bulkhead) which is indicated in a picture in step 3 but it nearly goes unnoticed. This part is the most important of the body assembly since if glued first, it allows that N takes the proper shape.

Esta Nota es ofrecida en formato PDF, el cual puede ser leído o impreso usando el Acrobat reader, contacte a nuestro webmaster > Aquí

Incluye más de 159 imágenes, aquí solo mostramos las paginas de texto.


This note is offered in PDF format to be read or printed using Acrobat reader, contact our webmaster > Here

Includes more than 159 pics, here we show only the text pages.



Comment in Facebook

MODELERSITE.COM takes no responsibility and assumes no liability for any content posted by users or any third party and they will be liable for any damages of any kind, including, but not limited to direct, indirect, incidental, punitive, and consequential damages.

Subscribe our Newsletter




December 2015 Over the end of the year, we are offering a preview of the best articles we were proud to have during 2015. Enjoy them and happy new year.


By Modeler Site

Problems downloading files

By Mario Covalski

Realistic wire wheels for 1/12 scale motorcycles One of the biggest challenges for a modeler who builds motorcycles in 1/12 scale, is to modify a wire wheel and make it look realistic; specially without having to buy an aftermarket kit. Anyway, there are no kits for this kind of modification (except for one of the Acu-stion for the Tamiya XV1600 kit), so it's not possible to get one. So any modeler attempting to do this task must rely in his/her ability in order, to get a good result.

By Gary Wickham

Advanced techniques: Building the P-51D Mustang "Lt Col John Myers" Petie 3rd Dragon 1/32 scale The infamous Dragon P-51D in 1/32. This model was started before Tamiya announced their kit, and I have to admit that during this build I did consider scrapping it more than once. In the end, I am very glad I did not. Despite the challenges and limitations of this kit, I am very happy (and proud) of the end result.

By Edwing E. Merlo Paredes

Building the Mini Cooper S Countryman, a guide for beginners Hasegawa #24121 - 1/24 scale The aim of this article is to give the reader a detailed and comprehensive guide. Here you’ll have typical indications for the most experienced modelers but very useful for newcomers or for those about to take their first steps into scale model cars. In spite that this kit is simple, it’s very important to follow the instructions to avoid unexpected surprises. In spite that modelers use to skip or change the order in the instruction steps, I’ll build this kit as per instructions.

By Mario Covalski

Building an improving the Protar Mclaren MP 4/2C - 1/12 scale ( revised with new pictures) My objective when I built the PM4/2 was to have a depiction of that car, with the quality aspect of Tamiya's McLaren MP4/6 kit, due to the similarity of both cars, and the building materials. The purpose of this note would not be to tell you how I built the model, because this kit has been discontinued more than ten years ago, so it is quite difficult to get one. I don't think it is reasonable to write a thorough note on specific details; so I will concentrate in general detailing that can be applied to other models with similar characteristics... and quality.

By Mario Covalski

Tamiya Caterhams, a step by step guide for novices 1/12 scale The first Catherham from Tamiya coming to my hands at the end of 1994, was the “Cycle Fender Special” (10202), since the “Super Seven BDR was out of stock, and it was impossible for me to get it from the stores I used to buy kits. From that moment on, my affair with which, I think is the best scale car kit ever produced, began. And here my comment: probably, you have seen better detailed kits, or even superb models limited editions.

By Roberto Jacobone

Tamiya Porsche 911, A weekend project for novices 1/24 scale This Porsche 911 has been built in a few nights to be entered at the “Trofeo Tamiya” which took place the day I completed the model. I normally have no problems in starting new projects but then I struggle to finish one, except if I have to enter a contest. At that time the 911 Carrera was a relatively new issued kit, so mine would have been the first one seen at a contest in my area, that’s the reason why I choose a non-standard eye-catching color and showy wheels.

By Patricio Delfosse

Detailing and weathering the JSU-122 Dragon #6013 1/35 scale This note aims at showing the corrections made from scratch, as well as pointing out the necessary modifications to include the Eduard's improvement set to the kit. Also, I focused on the painting aspects to get a weathered effect.

By Denis R.S.Bomfim

Building rusted cars - VW 1966 - 1/24 scale It all started with a joke, I built a rusted Mustang GT 350 to make a gift to a friend who only builds Mustangs. It was at a modelers meeting when he received a homage and the joke consisted of letting him know the arduous remodeling and restoration work he would have with this rusted Mustang. I took advantage of my work and presented it in a contest that took place in Campinas city. Finally, the model was “best of the show” and they called me mad for giving a winning model. My answer was.... I will have to make another rusted model for me.

By William Chan

How to build a winner. Ferrari F2001B (First place TamCon 2005) 1/20 scale Here William offers us a large article, step by step, with pictures during the whole building and a commentary about what we are looking, he calls this a diary, but I think that’s the state of the art of the patience to take pictures. Thanks for the time and effort William spent on writing this article for Modeler Site.

By Mario Covalski

Building 1/12 F1 resin model kits: A step by step guide for novices This article aims at offering an illustrated guide, with pictures, explaining step by step the tasks that should be done, how to and the reasons, it’s basically a visual guide, based on the construction of two MG models: the 2002 Ferrari and the 2003- GA.

By William Chan

Building the Tamiya Ferrari 310B first place TamCon 2003 Tamiya 1/20 scale F310B was a 1997 Ferrari F1 contender. It was very close to take away world championship from Jacque Villeneuve that year until the final nasty collision caused by Michael Schumacher. As a result, Schumacher was the one got thrown off the track and Villeneuve went on the win the driver championship. Later Schumacher was disqualified that year too. Very memorable year especially when Schumacher was fighting all points back and it made thing exciting.

By Alessandro Prini

A cutaway Testarossa Tamiya 1/24 Usually I am not concerned with production cars but, inspirated by some drawings published in Quattroruote (the most important Italian cars magazine) during the 80’s, I decided to start a series of cutaway models, revealing the beautiful technique hidden under their body panels. Some sport cars from the Tamiya range (namely Ferrari) are the perfect bases to carry out this long-term project, so let’s begin with the Testarossa.