Facebook Twitter YouTube YouTube RSS

Converting the AMT Grumman F7F-3 Tigercat in a F7F-3P

By Claudio Kalicinski  
Converting the AMT Grumman F7F-3 Tigercat in a F7F-3P - 1/48 Scale Airplanes

Read More

Improving and converting the AMT Grumman F7F-3 Tigercat in a F7F-3P English BODY {display:none}


Converting the AMT Grumman F7F-3 Tigercat in a F7F-3P

by Claudio Kalicinski © 2007 Modeler Site

Legal Notice

No material from Modeler Site any Web site owned, operated, licensed, or controlled by Damian Covalski may be copied, reproduced, republished, uploaded, posted, transmitted, or distributed in any way, except that you may download one copy of the materials on any single computer for your personal, non-commercial home use only, provided you keep intact all copyright and other proprietary notices. Modification of the materials or use of the materials for any other purpose is a violation of Damian Covalski's copyright and other proprietary rights.

Read More here > Legal notice

Big size photos are only available in our PDF format.

The main reference I consulted to build this kit was the Grumman F7F Tigercat book (Vol 1y2) by Adam Jarski from AJ Press, but first of all I’d like to advise you to get rid of the tyres supplied with the kit since they have the strange quality of attacking the plastic, melting it just when coming into contact, so don’t keep them….you’ll save yourself a lot of trouble.


Thus, you may replace them with the Cutting Edge’s (CEC 48137) which are the best or the True Details resin ones (TD48091) I chose since they’re cheaper but not bad; nevertheless, they needed some sanding since they appear too “weighted” when compared to the ones in the references pictures.

Coming back to the kit, AMT identifies it as the F7F-3, this is the Tigercat day fighter version, however if you watch carefully, you’ll realize that actually, it’s a hybrid, since it has some features typical of the fighter version (with nearly no operational use) and others of the reconnaissance version which was the one I decided to represent, but soon, I found out that the available information was really very scarce.

After looking at the available references pictures carefully, I reached the conclusion that the kit would need the following modifications, markings aside, to be converted in a F7F-3P:

The 3P version was equipped with 4 cameras placed at the back of the fuselage (two on the left side, one on the right and other on the lower area) in rooms that had sliding covers and it was difficult to see them when the airplane’s on the ground since those covers are usually closed. The kit comes with an opening to place the camera on the right side, but it doesn’t have the lower one and one at the left side.


Most of the -3Ps didn’t have the underwing pylons for HVAR rockets. Though they have two underwing ones and a centerline pylon where the 570 liters (150 gallons) and 1135 liters (300 gallons) fuel tanks were usually placed.


The ADF antenna should be added to the fuselage behind the cockpit.



I started as I use to, with the cockpit and though you may use resin or PE detailing sets such as Cutting Edge (48066) or Eduard (48178), I decided to detail the interior using plasticard, copper, bronze and steel wire. First, I replaced the AMT seat with one I scratchbuilt from plasticard as follows:

With the help of Corel Draw, I drew the different parts of the seat which were printed in 0,2 mm plasticard, to be later cut, assembled and painted Model Master Interior Green (1715)


Next, I added an Eduard set that replicated WWII American seatbelts (ED 48028) painted Model Master 1170Light Tan, and the buckles in Humbrol 11 Silver. I only glued the belts lower sections since the ones which will cross over the pilot’s shoulders, will have to go over the shielded plate of the headrest which I had to build and glue later.

Then, I added wires, hoses, levers, handles and boxes to detail the cockpit’s walls. Even I used a small gear coming from a clock for the left panel, since it replicated the exact shape of the stabilizer trim lever.

This special issue is only available in pdf format. This is a technical article of 27 pages. Includes more than 147 high res pictures. > Here


Support us ordering our notes in PDF > Here

Comment in Facebook

MODELERSITE.COM takes no responsibility and assumes no liability for any content posted by users or any third party and they will be liable for any damages of any kind, including, but not limited to direct, indirect, incidental, punitive, and consequential damages.

Subscribe our Newsletter




December 2015 Over the end of the year, we are offering a preview of the best articles we were proud to have during 2015. Enjoy them and happy new year.


By Modeler Site

Problems downloading files

By Mario Covalski

Realistic wire wheels for 1/12 scale motorcycles One of the biggest challenges for a modeler who builds motorcycles in 1/12 scale, is to modify a wire wheel and make it look realistic; specially without having to buy an aftermarket kit. Anyway, there are no kits for this kind of modification (except for one of the Acu-stion for the Tamiya XV1600 kit), so it's not possible to get one. So any modeler attempting to do this task must rely in his/her ability in order, to get a good result.

By Gary Wickham

Advanced techniques: Building the P-51D Mustang "Lt Col John Myers" Petie 3rd Dragon 1/32 scale The infamous Dragon P-51D in 1/32. This model was started before Tamiya announced their kit, and I have to admit that during this build I did consider scrapping it more than once. In the end, I am very glad I did not. Despite the challenges and limitations of this kit, I am very happy (and proud) of the end result.

By Edwing E. Merlo Paredes

Building the Mini Cooper S Countryman, a guide for beginners Hasegawa #24121 - 1/24 scale The aim of this article is to give the reader a detailed and comprehensive guide. Here you’ll have typical indications for the most experienced modelers but very useful for newcomers or for those about to take their first steps into scale model cars. In spite that this kit is simple, it’s very important to follow the instructions to avoid unexpected surprises. In spite that modelers use to skip or change the order in the instruction steps, I’ll build this kit as per instructions.

By Mario Covalski

Building an improving the Protar Mclaren MP 4/2C - 1/12 scale ( revised with new pictures) My objective when I built the PM4/2 was to have a depiction of that car, with the quality aspect of Tamiya's McLaren MP4/6 kit, due to the similarity of both cars, and the building materials. The purpose of this note would not be to tell you how I built the model, because this kit has been discontinued more than ten years ago, so it is quite difficult to get one. I don't think it is reasonable to write a thorough note on specific details; so I will concentrate in general detailing that can be applied to other models with similar characteristics... and quality.

By Mario Covalski

Tamiya Caterhams, a step by step guide for novices 1/12 scale The first Catherham from Tamiya coming to my hands at the end of 1994, was the “Cycle Fender Special” (10202), since the “Super Seven BDR was out of stock, and it was impossible for me to get it from the stores I used to buy kits. From that moment on, my affair with which, I think is the best scale car kit ever produced, began. And here my comment: probably, you have seen better detailed kits, or even superb models limited editions.

By Roberto Jacobone

Tamiya Porsche 911, A weekend project for novices 1/24 scale This Porsche 911 has been built in a few nights to be entered at the “Trofeo Tamiya” which took place the day I completed the model. I normally have no problems in starting new projects but then I struggle to finish one, except if I have to enter a contest. At that time the 911 Carrera was a relatively new issued kit, so mine would have been the first one seen at a contest in my area, that’s the reason why I choose a non-standard eye-catching color and showy wheels.

By Patricio Delfosse

Detailing and weathering the JSU-122 Dragon #6013 1/35 scale This note aims at showing the corrections made from scratch, as well as pointing out the necessary modifications to include the Eduard's improvement set to the kit. Also, I focused on the painting aspects to get a weathered effect.

By Denis R.S.Bomfim

Building rusted cars - VW 1966 - 1/24 scale It all started with a joke, I built a rusted Mustang GT 350 to make a gift to a friend who only builds Mustangs. It was at a modelers meeting when he received a homage and the joke consisted of letting him know the arduous remodeling and restoration work he would have with this rusted Mustang. I took advantage of my work and presented it in a contest that took place in Campinas city. Finally, the model was “best of the show” and they called me mad for giving a winning model. My answer was.... I will have to make another rusted model for me.

By William Chan

How to build a winner. Ferrari F2001B (First place TamCon 2005) 1/20 scale Here William offers us a large article, step by step, with pictures during the whole building and a commentary about what we are looking, he calls this a diary, but I think that’s the state of the art of the patience to take pictures. Thanks for the time and effort William spent on writing this article for Modeler Site.

By Mario Covalski

Building 1/12 F1 resin model kits: A step by step guide for novices This article aims at offering an illustrated guide, with pictures, explaining step by step the tasks that should be done, how to and the reasons, it’s basically a visual guide, based on the construction of two MG models: the 2002 Ferrari and the 2003- GA.

By William Chan

Building the Tamiya Ferrari 310B first place TamCon 2003 Tamiya 1/20 scale F310B was a 1997 Ferrari F1 contender. It was very close to take away world championship from Jacque Villeneuve that year until the final nasty collision caused by Michael Schumacher. As a result, Schumacher was the one got thrown off the track and Villeneuve went on the win the driver championship. Later Schumacher was disqualified that year too. Very memorable year especially when Schumacher was fighting all points back and it made thing exciting.

By Alessandro Prini

A cutaway Testarossa Tamiya 1/24 Usually I am not concerned with production cars but, inspirated by some drawings published in Quattroruote (the most important Italian cars magazine) during the 80’s, I decided to start a series of cutaway models, revealing the beautiful technique hidden under their body panels. Some sport cars from the Tamiya range (namely Ferrari) are the perfect bases to carry out this long-term project, so let’s begin with the Testarossa.