Protar's 1/12 Fiat 806 1927


by  Rafael Zambrino


The Protar's kit is of an acceptable quality, I didn't make extra details or improvement, just I added the motor wired. The modeler who wants to begin to build this model will have to sand the metallic body and the chassis parts thoroughly, then give them at least two layers of base and final color paint. After that, the whole body will have to be polished.
I glued all chassis metallic parts with CA gel type and at last, if when sanding the body the engraved rivet disappeared, new ones will have to be done. I drilled with 0,5mm and used copper nails as the ones used in naval models.

04.jpg (34946 bytes) 01.jpg (80663 bytes) 03.jpg (72688 bytes) 02.jpg (59810 bytes)
Mvc-457f.jpg (49388 bytes) Mvc-458f.jpg (77272 bytes) Mvc-459f.jpg (84930 bytes) Mvc-460f.jpg (75344 bytes)
Mvc-461f.jpg (82057 bytes) Mvc-462f.jpg (71631 bytes) Mvc-463f.jpg (70804 bytes) Mvc-464f.jpg (73163 bytes)
Mvc-465f.jpg (60126 bytes) Mvc-466f.jpg (69226 bytes) Mvc-467f.jpg (78189 bytes) Mvc-468f.jpg (103463 bytes)
Mvc-469f.jpg (77345 bytes) Mvc-470f.jpg (98335 bytes) Mvc-471f.jpg (86387 bytes) Mvc-472f.jpg (88195 bytes)
Mvc-473f.jpg (87665 bytes) Mvc-474f.jpg (67756 bytes) Mvc-475f.jpg (55836 bytes) Mvc-476f.jpg (87430 bytes)
Mvc-477f.jpg (74303 bytes) Mvc-478f.jpg (108061 bytes) Mvc-479f.jpg (61042 bytes) Mvc-480f.jpg (82496 bytes)